| “This site contains affiliate links for which OEMDTC may be compensated” |
May 13, 2019 NHTSA CAMPAIGN NUMBER: 19V366000
Shifter position may incorrectly indicate ‘Park’
If the gear shift lever position does not match the actual transmission gear, the vehicle may move in an unexpected direction. Additionally, despite selecting ‘Park’, if the parking brake is not applied before the vehicle is exited, the vehicle may roll. Either scenario increases the risk of crash or injury.
NHTSA Campaign Number: 19V366
Manufacturer Ford Motor Company
Components POWER TRAIN
Potential Number of Units Affected 2,534
Summary
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles. The fasteners that attach the transmission shifter cable bracket to the transmission may loosen allowing the transmission to be in a different gear than indicated by the gear shift lever position.
Remedy
Ford will notify owners, and dealers will inspect and tighten the transmission shift cable bracket fasteners as necessary, and verify the proper transmission shift operation, free of charge. The recall began July 1, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 19S15.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
June 13, 2019
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 19S15 –
Supplement #1
Certain 2019 Model Year Ranger Vehicles – Transmission Shift Lever Cable Bracket Fasteners
REASON FOR THIS SUPPLEMENT
Repairs are now available for all vehicles, including updates to the following sections for 4-wheel drive vehicle repair information:
- technical information
- labor allowances
- parts ordering information
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Ranger | 2019 | Michigan Truck | March 5, 2019 through March 13, 2019 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS SAFETY RECALL
The affected vehicles may have loose or missing fasteners that attach the transmission shift cable bracket to the transmission housing. A transmission shift cable bracket with loose or missing fasteners can result in the following:
- Unintended vehicle movement or roll away, if the parking brake is not applied.
- When exiting the vehicle, the ignition key (if equipped) can be removed with no Instrument Panel Cluster (IPC) warning message or chime indicating that the transmission is not in Park.
- The actual transmission gear as displayed in the IPC may be different than indicated by the position of the transmission shift lever.
- No ability to restart the vehicle, unless the actual transmission gear as displayed in the IPC is Park or Neutral.
These conditions increase the risk of crash or injury.
The parking brake should be applied whenever the vehicle is parked prior to the vehicle repair.
SERVICE ACTION
Repairs are now available for all vehicles.
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to verify the transmission shift lever cable bracket to transmission fastener torque, and verify proper operation of the shift lever, PRNDS, and starting position. This service must be performed on all affected vehicles at no charge to the vehicle owner.
OWNER NOTIFICATION AND MAILING SCHEDULE
Owner letters are expected to be mailed the week of July 1, 2019. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
ATTACHMENTS
Attachment I: Administrative Information
Attachment II: Labor Allowances and Parts Ordering Information
Attachment III: Technical Information
Owner Notification Letters
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
ATTACHMENT I
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD –
Safety Recall 19S15 – Supplement #1
Certain 2019 Model Year Ranger Vehicles
Transmission Shift Lever Cable Bracket Fasteners
OASIS ACTIVATION
OASIS will be activated on May,14, 2019
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on May 14, 2019. Owner names and addresses will be available by July 12, 2019.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall.
SOLD VEHICLES
- Ford has not issued instructions to stop selling/delivering or driving used vehicles under this safety Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Correct all affected units in your new vehicle inventory before delivery.
DEALER-OPERATED RENTAL VEHICLES
The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
- For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances for FSA’s / Related Damage.
- For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked.
- Ford vehicles – 3 years or 36,000 miles
CLAIMS PREPARATION AND SUBMISSION
- Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
- When entering claims, select claim type 31: Field Service Action. The FSA number (19S15) is the sub code.
- For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
- Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
ATTACHMENT II
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD –
Safety Recall 19S15
Certain 2019 Model Year Ranger Vehicles
Transmission Shift Lever Cable Bracket Fasteners
LABOR ALLOWANCES
| Description | Drive Type | Labor Operation | Labor Time |
| 2-Wheel Drive Vehicles – Torque transmission shift lever cable bracket fasteners and check gear display in IPC (includes time to replace fastener(s), if missing) | 2-Wheel Drive | 19S15B | 0.3 Hours |
| 4-Wheel Drive | 19S15C | 0.7 Hours | |
| Additional time to perform the transmission shift lever cable adjustment (as needed) | 19S15D | 0.7 Hours | |
PARTS REQUIREMENTS / ORDERING INFORMATION
To place an order, submit a VIN-specific Part Order contact via the SSSC Web Contact Site.
| Description | Drive Type | Order Quantity | Claim Quantity | Part Number |
| CV joint-to-transfer case flange cup bolts and retaining straps (package contains 2 bolts and one strap) |
4-Wheel Drive only |
3 | 3 | AB3Z-4B496-A |
| Transmission Shift Lever Cable Bracket Fastener (package of 4)* | As Required | W700056-S450B |
||
NOTE: The CV joint-to-transfer case flange cup bolts and retaining straps are currently not available in sufficient quantities to repair all 4WD vehicles. The CV joint-to-transfer case flange cup bolts and retaining straps part orders can be requested through the SSSC using the SSSC link at the bottom of the OASIS VIN report screen to repair vehicles that meet the following criteria only:
- Affected customer vehicles that arrive at your dealership.
- New in-stock vehicles with a signed sales contract. (submit copy of contract via SSSC link). It is anticipated that part number AB3Z-4B496-A will be available in sufficient quantities to allow part ordering for all 4WD vehicle repairs, regardless of sales/contract status, the week of July 8, 2019.
Open part ordering for part number AB3Z-4B496-A is expected to begin July 31, 2019.
Dealers will be notified via a DOES II communication if circumstances warrant a change in part supply strategy and when open ordering resumes.
* Less than 2% of the affected vehicle population is expected to require transmission shift lever cable bracket fastener replacement.
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS RETENTION AND RETURN POLICIES.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
CERTAIN 2019 MODEL YEAR RANGER VEHICLES – TRANSMISSION SHIFT CABLE BRACKET FASTENERS
OVERVIEW
The affected vehicles may have loose or missing fasteners that attach the transmission shift cable bracket to the transmission housing. A transmission shift cable bracket with loose or missing fasteners can result in the display of the actual transmission gear in the Instrument Panel Cluster (IPC) to be different than indicated by the position of the transmission shift lever, unintended vehicle movement or roll away if the parking brake is not applied, or the inability to restart the vehicle. These conditions increase the risk of crash or injury.
The parking brake should be applied whenever the vehicle is parked prior to the vehicle repair.
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to verify the transmission shift lever cable bracket to transmission fastener torque, and verify proper operation of the shift lever, PRNDS, and starting position.
This service must be performed on all affected vehicles at no charge to the vehicle owner.
SERVICE PROCEDURE
Recommended Tool List:
| General Tools 2-Wheel Drive Vehicles | General Equipment |
| 3/8″ Drive Ratchet | Flashlight |
| 3/8″ Drive Torque Wrench | |
| 3/8″ Drive T40 Torx Socket | |
| General Tools 4-Wheel Drive Vehicles | Cable Adjustment Tools (If Required) |
| 3/8″ Drive Ratchet | 1/4″ Drive Power Tool |
| 3/8″ Drive Power Tool | 1/4″ Drive Ratchet |
| 3/8″ Drive Torque Wrench | 1/4″ Drive Torque Wrench |
| 3/8″ Drive 20 inch Extension | 1/4″ Drive 3 inch Extension |
| 3/8″ Drive T40 and T45 Torx Socket | 1/4″ Drive T20 and T25 Torx Socket |
| Small Rubber Mallet | 1/4″ Drive 7mm Socket |
| Paint Marker | Plastic Trim Tool |
1. Is the vehicle 2-wheel drive?
4-Wheel Drive: Proceed to step 2.
2-Wheel Drive: Proceed to step 3.
NOTICE: To avoid damage to the joint or gaiter, do not allow the driveshaft to hang.
NOTICE: Tighten driveshaft flange to pinion flange bolts diagonally.
NOTE: Make sure that new bolts are installed.
NOTE: Install all the bolts finger tight before final tightening.
NOTE: Lock the driveshaft before removing the bolts to avoid slipping.
- Vehicles equipped with a front driveshaft must have the driveshaft positioned aside to access the shifter cable bracket bolts. See Figure 1.
- Index-mark the front driveshaft CV joint-to-transfer case flange cup.
- Remove and discard the CV joint-to-transfer case flange cup bolts and retaining straps.
- Torque: Stage 1: 21 Ib.ft (28 Nm).
Stage 2: 120°
- Torque the two transmission shift lever cable bracket fasteners, if the fasteners are missing or damaged replace the fasteners. Proceed to step 4. See Figure 2.
- Torque: 18 Ib.ft (25 Nm).
- Move the transmission shift lever into all gear positions and check the corresponding IPC gear display indicator is illuminated. Additionally, check each gear display indicator remains illuminate while performing each of the checks below without depressing the brake pedal or the shift lever knob.
NOTE: The brake pedal and shift lever knob should be depressed to change shift lever positions between checks.
- “P” remains displayed on the IPC while the transmission shift lever is in park and pulled down to the detent.
- “R” remains displayed on the IPC while the transmission shift lever is in reverse and pushed up to the detent.
- “N” remains displayed on the IPC while the transmission shift lever is in neutral and pushed up t o the detent.
- “D” remains displayed on the IPC while the transmission shift lever is in drive and pushed up and down to the detents.
- “S” remains displayed on the IPC while the transmission shift lever is in sport.
- Did all transmission shift lever checks in Step 4 pass?
Yes: The repair is complete.
No: Perform a transmission shift lever cable adjustment then repeat step 4. Please follow the Workshop Manual (WSM) Selector Lever Cable Adjustment procedure in Section 307-05.
- Reassemble the vehicle by reversing the removal steps.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FORD | RANGER | 2019 |
10 Associated Documents
Defect Notice 573 Report
RCLRPT-19V366-1915.PDF 215.07KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-19V366-3727.pdf 245.943KB
Loading...
Manufacturer Notices(to Dealers,etc) – SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 19S15 Certain 2019 Model Year Ranger Vehicles – Transmission Shift Lever Cable Bracket Fasteners
RCMN-19V366-6977.pdf 343.756KB
Loading...
Miscellaneous Document – Ford Media Center May 15, 2019 FORD MOTOR COMPANY ISSUES TWO RECALLS IN NORTH AMERICA
RMISC-19V366-5358.pdf 287.896KB
Loading...
Manufacturer Notices(to Dealers,etc)- NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 19S15 – Supplement #1
RCMN-19V366-3838.pdf 508.748KB
Loading...
Recall Quarterly Report #2, 2019-4
RCLQRT-19V366-4738.PDF 211.243KB
Loading...
Recall Quarterly Report #3, 2020-1
RCLQRT-19V366-8589.PDF 211.33KB
Loading...
ISSUED Renotification Notice
RCRN-19V366-5790.pdf 368.301KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V366-5837.pdf 94.175KB
Loading...
Recall Quarterly Report #1, 2019-3
RCLQRT-19V366-1434.PDF 211.246KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V366&docType=RCL
- Compact Size: Measuring approximately 8 inches in length, 4 inches in width, and 5 inches in height, these wheel chocks offer a convenient and space-saving solution for securing your vehicle or trailer.
- All-Weather Construction: Built for durability in any climate, these wheel chocks feature all-weather construction, ensuring reliable performance and security in various weather conditions.
- Enhanced Traction: Equipped with a rubber traction pad, these wheel chocks offer superior grip and traction to keep your vehicle or trailer securely in place, even on slippery surfaces.
- Convenient Design: Featuring a built-in handle, these wheel chocks allow for easy placement and positioning, providing added convenience during use.
- Superior Performance: Designed to outperform plastic or resin-made wheel chocks, these solid rubber chocks offer exceptional durability and reliability for keeping your vehicle or trailer stationary.
- Generous Dimensions: With dimensions of approximately 10 inches in length, 8 inches in width, and 6 inches in height, these wheel chocks offer ample size for securing heavy-duty loads with ease.
- Heavy-Duty Rubber Construction: Crafted from durable rubber, these wheel chocks are engineered to withstand loads and provide reliable security for your vehicle or trailer.
- Superior Grip: Made from non-slip, oil-resistant rubber, these wheel chocks offer increased grip and traction to keep your vehicle or trailer securely in place, even on slippery surfaces.
- Wide Base Design: Designed with a wide base, these wheel chocks provide increased stability and rigidity, ensuring enhanced security and peace of mind during use.
- Versatile Attachment: Equipped with a steel eyebolt, these wheel chocks offer the option for chain attachment (chain not included), providing added security and flexibility for various applications.
- 【UPGRADED DURABLE RUBBER】: Wheel chocks adopt an upgraded version of premium rubber, and use nylon-enhanced technology. Which is twice as strong as ordinary rubber. Unlike similar products that will slip, crush, oxidize, tear or break, these wheels are more solid and durable.
- 【SPECIAL DESIGN】: Tire chocks the overall use of a triangular design with ribbed and textured at the bottom. Make the product grip and friction stronger. It can be in place with just one quick step, no need for hammering, heavy blows, and other tired actions. People say that this special design does not have to worry about being squashed even on a wheel ramp or a smooth garage floor.
- 【CONVENIENT to CARRY】: The vehicle wedge avoids the traditional hard-to-grip and easy to rust and bend steel rings. Instead, there is a high-quality rubber handle that can be used in pairs with ropes. So that the two-wheel-bearing housings can be kept together and easily pulled out. The compact size and sturdy handle make it more convenient to carry, use and summarize.
- 【ADAPTABILITY】: Leveling Blocks are suitable for RVs, campers, trailers, cars, trucks, and small airplanes. Wheel chock can avoid the danger of rolling and make your travel safer. The feature of versatility makes it possible to carry a limited number of tire gears and can be used in a variety of places.
- 【SIZE and SERVICE】: The TOPSUNCOJIAS product size is 7.9 x 5.9 x 4 inches, and weighs 3.5 pounds. There are 2 packs and 4 packs in quantity. If you have any questions after purchase, you can consult, and we will reply and solve them within 24 hours.
- Ensure Safe Repairs: This heavy duty wheel chock is an essential safety tool to use when working on your vehicle with ramps or other lifting devices
- Keep Your Vehicle in Place: The wheel chock's design prevents tires from rolling, giving you peace of mind while you work
- Convenient for Home Use: Designed for use in home garages, this wheel chock is not intended for commercial applications
- Easy to Store: The compact, stackable and nestable design makes it easy to store when not in use
- Built to Last: Made of heavy duty resin and proudly manufactured in the United States, this wheel chock is built to withstand
![Vacallity Wheel Chocks for Travel Trailers [2 Pair 4 Pack], Sturdiness Heavy Duty Solid Rubber Camper Trailer RV Wheel Chock Blocks, for Aircraft&Truck&Car tire Stopper, Wheel Immobilizers & Chocks](https://m.media-amazon.com/images/I/411vpzjLLdL._SL160_.jpg)
- 【Size and material】Our wheel chocks are made of high quality rubber and have substantial weight (18lbs total) enough to stay put the car while not bring too heavy to move around.Size is 3.9" ×4.7" ×8.2" and perfect for most wheel/tires and utility trailer.
- 【Multifunction Models】These rubber chocks can be used for a wide range of purposes, perfect for Trucks, Trailers, Small Airplanes, RVs, and more to prevent your vehicle from rolling away.High visibility safety reflective tapes ensure a safe working environment while your vehicles are at rest; triangular three-lobe shape to sorta interlock for easy storage.
- 【Reflective Strips】: Each wheel block has 3 yellow reflective strips, which can ensure high visibility even in low light conditions and is suitable for various environments
- 【Included】:Equipped with a 30-inch long high-performance nylon connecting rope, allowing you to block large vehicles such as trucks and trailers and even aircraft tires more easily
- 【Convenient ＆practical design】Each wheel block has 3 reflective yellow stripes that can ensures high visibility even in low light conditions and is suitable for any scene, indoor or outdoor, such as garages, schools, warehouses and other commercial parking lots.30-inch long high-performance nylon connecting rope allows you to chock larger vehicles including trucks and trailers even aircraft tires more easily
- Comes in bright Neon Green color ; Pack of 2, each dimension is 8. 4"" x 4. 75"" x 4. 25"" weighing 1. 6lbs each. Fits tires up to 26"" in diameter.
- Ideal for your car, small utility trailers, min vans or small RV's
- Designed with durable hard Polypropylene construction and hard plastic. Has a lightweight design, very easy for storage and transporting unlike the heavy rubber chocks. You can easily store the chock block in your trunk, or toolbox.
- Re-hitch with confidence. The wedge serrated top easily grabs tires No pounding or hammering is necessary to wedge tires, you only have to slide these chock blocks in place and give them a quick kick.
- Designed for all weather toughness that shrugs off dirt, dust, salt, ice, mud, sun and heat. Bottom comes with rubber pads for anti-sliding.
- Long Nylon Rope: Our rubber wheel chocks come with a 30" long connecting rope, making it easier for you to chock larger vehicles including trucks and trailers
- Heavy Duty: These chocks are made from durable and robust rubber, long-lasting, slip-resistant, weather-resistant, and oil resistant, and built to put up with heavy usage, that is far stronger than plastic chocks. 3-sided with reflective tapes on the surface can keep your vehicle or trailer secure at any time
- Multifunction: These chocks can be used for a wide range of purposes, perfect for chocking cars, trucks, trailers, small airplanes, RVs, dumpsters, boats, horse trailers, vans, and more to prevent your vehicle rolling away
- Aircraft Block Details: Weighing 6.6lbs each, these chocks are easy to place and remove. Measuring 7.8" x 4.1" x 3.9", they are large enough to provide solid support. Clear yellow stripes also improve visibility
- Convenient: Our wheel chock block with high grip edges, convenient to use and transport. Anti-slip design help the chocks stay in place
- 【HIGH TRACTION】 The design includes horizontal traction ribs that grip the road and both sides of the tire to safely keep from rolling. Come with a 30" long connecting high-performance rope, making it easier for you to chock larger vehicles including trucks and trailers.
- 【BUILT TO LAST】 The specially designed curved shape of the wheel chock allows the vehicle's tire to fit perfectly on the wedge and improves grip. It is constructed of durable, solid, oil-resistant rubber, make our wheel chocks the perfect choice to keep your vehicle or trailer secure in any climate.
- 【Reflective Strips】 Every wheel block has 3 reflective yellow stripes to ensure high visibility even in low light conditions.Great for indoor or outdoor environments such as garages, schools, warehouses and other commercial parking lots.
- 【Multifunction Models】These rubber chocks can be used for a wide range of purposes, perfect for Trucks, Trailers, Small Airplanes, RVs, and more to prevent your vehicle from rolling away.
- 【Set of 2】 Includes 2 Pack, Dimensions: 4.1" x 7.8" x 3.9"; Weight(2 Pack): 6.8 Lbs, these professional-grade solid rubber wheel chocks are great for helping you park your car.
- Made from reinforced rubber with traction pad to provide a sure grip on virtually any surface
- 3-Sided chock with reflective tape on all sides for greater visibility
- Durable ribbed rubber construction
- Chock measures 9-1/2" x 5" x 4-1/4"
- Sold in pairs and include 36" visible nylon rope for easy handling and storage
Last update on 2024-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.