“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10165702
Manufacturer Communication Number: TSB 19-2273
Summary
Some 2015-2017 Mustang vehicles may experience an inoperative rear parking aid camera, luggage compartment lamp, luggage compartment lid release and/or poor satellite radio reception. This may be due to damage to the 14A005 harness in the area of the right side luggage compartment lid hinge. This concern may be accompanied by diagnostic trouble codes (DTCs) B115E, C1001, and B1A89. To resolve the condition, follow the Service Procedure steps to inspect and repair the wiring harness.
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
FORD | MUSTANG | 2015-2017 |
This bulletin supersedes 18-2362. Reason for update: New Part/Procedure For Same Condition
Model:
2015-2017 Mustang
Summary
This article supersedes TSB 18-2362 to update the Service Procedure.
Issue: Some 2015-2017 Mustang vehicles may experience an inoperative rear parking aid camera, luggage compartment lamp, luggage compartment lid release and/or poor satellite radio reception. This may be due to damage to the 14A005 harness in the area of the right side luggage compartment lid hinge. This concern may be accompanied by diagnostic trouble codes (DTCs) B115E, C1001, and B1A89. To resolve the condition, follow the Service Procedure steps to inspect and repair the wiring harness.
Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria:
- 2015-2017 Mustang
- Inoperative rear parking aid camera, luggage compartment lamp, luggage compartment lid release and/or poor satellite radio reception
- DTCs B115E, C1001, or B1A89 stored
Parts
Description | Part Number | Quantity |
Wiring Harness (Coupe) | FR3Z-14A411-X | 1 |
Wiring Harness (Convertible) | FR3Z-14A411-Y | 1 |
Coroplast Electrical Wire Harness Tape | NAI837X | 1 |
Shrink Tube From The Rotunda/Motorcraft 22-8 Awg Wire Splice Tool Kit Or Equivalent | Obtain Locally | 1 |
Service Procedure
NOTE: For repairs covered by the New Vehicle Limited Warranty, completion of the procedure outlined in this TSB does not require obtaining Prior Approval or completion of a Cost Cap.
- Inspect the wiring harness on the underside of the luggage compartment lid. Is there evidence of wiring damage or chafing?
(1). Yes – proceed to the appropriate coupe or convertible procedure.
(2). No – this article does not apply. Refer to Workshop Manual (WSM), Section 415-00 for normal diagnostics.
Coupe
- Cut out the damaged section of the harness. Make the cut at the location of the harness noted. (Figure 1)
Figure 1
- Splice in the new section of harness, matching wire colors on the existing vehicle harness and the replacement section of harness as necessary. Follow the recommended wiring splice procedures in Section 5 of the Wiring Diagram. Stagger the location of each of the wire splices along the harness to minimize the overall size of the repair.
- Wrap the spliced area in Coroplast Electrical Wire Harness Tape or equivalent.
- Secure the replacement section of harness into the same body holes as the original section of harness was using the clips attached to the replacement section of harness.
- If DTCs were previously present, connect the appropriate Ford scan tool or equivalent to the DLC and clear all DTCs.
Convertible
- Cut out the damaged section of the harness. Make the cut at the location of the harness noted. (Figure 2)
Figure 2
- Splice in the new section of harness, matching wire colors on the existing vehicle harness and the replacement section of harness as necessary. Follow the recommended wiring splice procedures in Section 5 of the Wiring Diagram. Stagger the location of each of the wire splices along the harness to minimize the overall size of the repair.
NOTE: While it is necessary to cut and remove a section of the old satellite radio antenna cable along with the rest of the harness, do not splice the satellite radio antenna cable where the harness is cut. The satellite radio antenna cable provided with the new harness is long enough to overlay the entire length of the old cable.
- Remove the existing ground on this section of the harness from the body of the vehicle. Reinstall the ground on the new section of harness to the body of the vehicle.
- Overlay the satellite radio antenna cable included with the new section of harness. Refer to WSM, Section 415-00B, Satellite Radio Antenna, Removal and Installation.
- Wrap the spliced area in Coroplast Electrical Wire Harness Tape or equivalent.
- Secure the replacement section of harness into the same body holes as the original section of harness using the clips attached to the replacement section of harness.
- If DTCs were previously present, clear all DTCs with the appropriate Ford diagnostic scan tool or equivalent.
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN
Inoperative Park Aid Camera, Luggage Compartment Lamp,
Luggage Compartment Lid Release And/Or Poor Satellite Radio
Reception
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
Description | Operation No. | Time |
2015-2017 Mustang Coupe: Retrieve DTCs, Inspect And Repair Wire Harness Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 192273A | 1.2 Hrs. |
2015-2017 Mustang Convertible: Retrieve DTCs, Inspect And Repair Wire Harness Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 192273B | 2.8 Hrs. |
Repair/Claim Coding
Causal Part: 14A005
Condition Code: 30
19-2273
05 September 2019
https://www.nhtsa.gov/recalls?nhtsaId=10165702
https://static.nhtsa.gov/odi/tsbs/2019/MC-10165702-0001.pdf
18-2362
17 December 2018
https://www.nhtsa.gov/recalls?nhtsaId=10153932
https://static.nhtsa.gov/odi/tsbs/2018/MC-10153932-9999.pdf
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- -The most advanced high heat harness tape available
- -Superior abrasion & heat resistant
- -Resist chemical and fluid from engine compartment
- -Solvent-free advanced acrylic adhesive & flame-retardant
- -1 roll of Tesa 51036 (each roll is 19mm wide X 25meters long)
- -The most advanced high heat harness tape available
- -Superior abrasion & heat resistant
- -Resist chemical and fluid from engine compartment
- -Solvent-free advanced acrylic adhesive & flame-retardant
- -5 rolls of Tesa 51036 (each roll is 19mm wide X 25meters long)
- Widely application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
- Easy to tear. Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
- Professional cloth tape material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40°F ~ 221°F ), well seal and excellent flexibility.
- Excellent performance: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
- Specification: A set of 5 rolls wire harness cloth tap. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
- STRONG CLOTH ADHESIVE - Made of PET Cloth base, the friction harness tape has a strong anti-peeling performance and wont tear during use. Provides good flexibility to enhance comfort when bonding cables together. The adhesive of this tape holds up over time and offers a firm grip. Does not contain hazardous substances.
- WIRE LOOMS IN AUTO - WOD friction tape is widely used in the automotive industry. It helps to hold the cables and wires together while providing protection against moisture, vibration, and other environmental factors that can cause damage to the wires over time.
- HIGH TEMP AND NOISE REDUCTION - WOD black cloth tape is preferred for electricians, handymen, mechanics, and HVAC due to its temperature resistance capability. It can be applied at -40 ℉ environments and perform at up to 221 ℉, ideal for engine parts exposed to heat or cold, such as batteries, wires, air conditioning, or car audio installation.
- EASY TO TEAR BY HAND - The Friction Tape is HAND-TEARABLE and made of cloth fabric that ensures the material is ripped with your fingers and enhances the application process, leaving no residue behind if removed. It has a low skill and mastery requirement, so everyone can use it, from beginners to professionals!
- WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service.
- The most advanced high heat harness tape available
- Rated to 150C, Superior abrasion resistance
- Resists chemicals and fluids
- AAA adhesive, self extinguishing
- Wire Harness Cloth Tape Application: Automotive wire loom tape is widely used in the area near the engine, battery or on normal wire harness and also suitable for the use of wire harness in automobile interior noise reduction part, such as instrument panel harness. Wrap any wires that need to be repaired
- Temperature Resistance: Electrical wiring harness cloth tape made of high-quality polyester non-woven fabric and strong acrylic pressure sensitive adhesive, with high adhesive Force, abrasion resistance and high-temperature resistance (-40℉- 225℉)
- Easy to Tear: Oyviny automotive cloth tape is easy to tear and convenient to use, just wrap the harness cloth tape around the wiring harness and gently tear it apart, No tools required! You could tear the tape at any length according to your need
- Good Performance: Automotive wire loom harness cloth tape is wear-resistant and with strong anti-aging, which can be applied for a long time. It is also suitable for automotive circuit and engine maintenance to achieve the effect of insulation protection
- Harness Cloth Tape Size: Package comes with 5 rolls 25mm x 15m electrical wire harness tape. Each roll radio wiring harness cloth tape is 1 inch width and 50 feet length. The size and length is suitable for your daily use
- Enough to Use: you will get 2 rolls of wire harness tapes in the package, measuring approx. 2 inches x 49.2 ft/ 50 mm x 15 m for each; The proper size and sufficient length is suitable for your different daily needs in many use scenarios
- Safe Material: the wire harness tape is made of polyester non woven fabric material, quality pressure sensitive adhesive, high temperature and wear resistance, which can be applied for a long time
- Nice Performance: the adhesive fabric tape has nice noise reduction and heat insulation performance, very suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Easy to Use: the wire loom tape is simple and convenient to use, just wrap the tape on the wire and tear it gently, and you can decide the length of the tape according to your own needs
- Scope of Usage: the cloth electrical tape is suitable for automobile interior noise reduction part, such as instrument panel harness and main harness wound, and can also be applied for wire joint and wire fixing
- OEM-GRADE AUTOMOTIVE WIRE LOOM TAPE that’s specifically designed for high temp wirings. Our wiring harness tape prevents oil build-up, abrasion, and contains 10 rolls at 50 Feet, for a total of 500 feet.
- HEAVY-DUTY. With a tensile strength of 160lb/in, this cloth tape automotive withstands daily wear and tear, extreme heat, and humidity for up to 12 years without weakening or unraveling.
- RESIDUE-FREE. With a silicone adhesive, our fabric electrical tape will not leave a messy goo upon removal. This heat resistant wire loom tape prevents coil rattling, making it an essential high temp automotive tape for those who want silent and PRO-GRADE cable wrap results.
- EXCELLENT THERMALS. Operating at -40°F to 257°F, this high temp electrical tape can also be used under the hood, PC, or on high heat electrical wire harness wrap.
- INSTALLS CLEANLY. Made from fabric-polycarbonate composite, this automotive electrical tape can torn with bare hands, while being stretchy for accessing hard-to-reach areas.
- Harness Cloth Tape Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard.
- Harness Cloth Tape Material: These wiring harness tape are made of high quality cotton flannel and strong adhesive glue.
- Harness Cloth Tape Features: 1High Adhesive Force 2 Noise Resistance Well 3 Strong Abrasion Resistance 4 Hand Tearable 5 Strong Chemical Resistance.
- Harness Cloth Tape Size: Length 15 m, Width 15 mm.
- Car harness cloth tape is very convenient to use; just wrap the tape around the wire and gently tear it apart. No scissors or other tools are needed. The length of the tape can be determined according to your needs.
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.