“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10152486
Manufacturer Communication Number: 18N04-S1
Summary
Certain 2018 Model Year F-150, 2019 Model Year F-250 through F-550 Superduty and 2019 Model Year F-650 through F-750 Medium Duty Vehicles Equipped with a Diesel Engine – Powertrain Control Module Reprogramming
7 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FORD | F-150 | 2018 |
FORD | F-250 SD | 2019 |
FORD | F-350 SD | 2019 |
FORD | F-450 SD | 2019 |
FORD | F-550 SD | 2019 |
FORD | F-650 SD | 2019 |
FORD | F-750 SD | 2019 |
November 30, 2018
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: Customer Satisfaction Program 18N04 – Supplement #1
Certain 2018 Model Year F-150, 2019 Model Year F-250 through F-550 Superduty
and 2019 Model Year F-650 through F-750 Medium Duty Vehicles Equipped with a
Diesel Engine
Powertrain Control Module Reprogramming
REASON FOR THIS SUPPLEMENT
- 2019 MY F650 through F-750 Medium Duty Trucks are being added to this program.
- Integrated Diagnostic Software (IDS) release version updated.
PROGRAM TERMS
This is a one-time repair program with no time or mileage limits. Coverage is automatically transferred to subsequent owners.
URGENCY
Dealers are encouraged to complete this service on all in stock and customer vehicles brought in for any reason to ensure vehicles meet conditional certifications described in the Reason For Program section below.
VEHICLES COVERED BY THIS PROGRAM
Vehicle | Model Year | Assembly Plant | Build Dates |
F-150 | 2018 | Dearborn | September 13, 2017 through October 4, 2018 |
F-250 through F-550 | 2019 | Kentucky Truck | March 5, 2018 through August 22, 2018 |
Ohio | May 7, 2018 through August 28, 2018 | ||
F-650 through F-750 | 2019 | Ohio | April 18, 2018 through November 3, 2018 |
Affected vehicles are identified in OASIS.
REASON FOR PROGRAM
In all of the affected vehicles, the Diesel engines received a conditional certification from the California Air Resources Board (CARB). While current vehicles comply with CARB and EPA emissions regulatory requirements, the conditional certificate requires Ford to implement an enhanced calibration, which must be applied to all affected vehicles that come into the dealer.
SERVICE ACTION
If an affected vehicle comes into the dealership for any reason, dealers are to reprogram the Powertrain Control Module (PCM) using Integrated Diagnostic Software (IDS) release 111.06 or higher. This service must be performed at no charge to the vehicle owner.
OWNER NOTIFICATION MAILING SCHEDULE
No owner notification will be mailed on this program.
ATTACHMENTS
Attachment I: Administrative Information
Attachment II: Labor Allowances
Attachment III: Technical Information
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
ATTACHMENT I
Customer Satisfaction Program 18N04 – Supplement #1
Certain 2018 Model Year F-150 and 2019 Model Year F-250 through F-550 Superduty Vehicles
Equipped with a Diesel Engine
Powertrain Control Module Reprogramming
OASIS ACTIVATION
OASIS will be activated on October 11, 2018.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will not be activated for this service action.
SOLD VEHICLES
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
- Correct other affected vehicles identified in OASIS which are brought to your dealership
STOCK VEHICLES
- Perform this program on all affected vehicles in stock prior to delivery.
- Use OASIS to identify any affected vehicles in your used vehicle inventory
TITLE BRANDED / SALVAGED VEHICLES
Title branded, salvaged vehicles and vehicles with cancelled warranty coverage are eligible for this program unless emission coverage is explicitly cancelled, as indicated by one of the following OASIS Warranty Cancellation Messages only:
- SCRAPPED UNIT – ALL WARRANTY CANCELLED – TOTAL INCLUDING EMISSIONS
- ALL WARRANTY CANCELLED INCLUDING EMISSIONS
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
The use of rental vehicles is not approved for this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
- For related damage and access time requirements, refer to the Warranty and Policy Manual – Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances for FSA’s / Related Damage.
- For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the Related Damage radio button checked.
- For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
- Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
- When entering claims, select claim type 31: Field Service Action. The FSA number 18N04 is the sub code.
- For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
- Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
- Program Terms: This program does not have mileage or time limit.
ATTACHMENT II
Customer Satisfaction Program 18N04
Certain 2018 Model Year F-150 and 2019 Model Year F-250 through F-550 Superduty Vehicles
Equipped with a Diesel Engine
Powertrain Control Module Reprogramming
LABOR ALLOWANCES
Description | Labor Operation | Labor Time |
F-150 through F-550 Reprogram PCM using IDS release 111.06 or higher. | 18N04B | 0.4 hours |
F-650 through F-750 Reprogram PCM using IDS release 111.06 or higher. | 18N04C | 0.5 hours |
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.
ATTACHMENT III
CERTAIN 2018 MODEL YEAR F-150, 2019 F-250 THROUGH F-550 SUPERDUTY, AND 2019 F-650 THROUGH F-750 MEDIUM DUTY VEHICLES EQUIPPED WITH A DIESEL ENGINE — POWERTRAIN CONTROL MODULE REPROGRAMMING.
OVERVIEW
In all of the affected vehicles, the Diesel engines received a conditional certification from the California Air Resources Board (CARB). While current vehicles comply with CARB and EPA emissions regulatory requirements, the conditional certificate requires Ford to implement enhanced calibration, which must be applied to all affected vehicles that come into the dealer.
SERVICE PROCEDURE
Module Reprogramming
NOTE: Reprogram appropriate vehicle modules before performing diagnostics and clear all DTCs after programming. For DTCs generated after reprogramming, follow normal diagnostic service procedures.
1. Connect a battery charger to the 12V battery.
NOTE: Make sure the IDS computer does not enter sleep mode during programming.
2. Reprogram the Power Control Module (PCM) using Integrated Diagnostic Software (IDS) release 111.06 or higher. Make sure you are connected to the Internet prior to reprogramming.
NOTE: Calibration files may also be obtained at www.motorcraftservice.com.
NOTE: Follow the IDS on-screen instructions to complete the reprogramming procedure.
3. Disconnect the battery charger from the 12V battery once the reprogramming has completed.
Important Information for Module Programming
NOTE: When programming or reprogramming a module, use the following basic checks to ensure programming completes without errors.
- Make sure the 12V battery is fully charged before carrying out the programming steps and connect IDS/scan tool to a power source.
- Inspect Vehicle Communication Module (VCM) and cables for any damage. Make sure scan tool connections are not interrupted during programming.
- A hardwired connection is strongly recommended.
- Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC system, etc.) and close doors.
- Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio, etc.).
- Follow all scan tool on-screen instructions carefully.
- Disable IDS/scan tool sleep mode, screensaver, hibernation modes.
- Create all sessions key on engine off (KOEO). Starting the vehicle before creating a session will cause errors within the programming inhale process.
Recovering a module when programming has resulted in a blank module:
NEVER DELETE THE ORIGINAL SESSION!
a. Obtain the original IDS that was used when the programming error occurred during module reprogramming (MR) or programmable module installation (PMI).
b. Disconnect the VCM from the data link connector (DLC) and the IDS.
c. Reconnect the VCM to IDS and then connect to the DLC. Once reconnected, the VCM icon should appear in the corner of the IDS screen. If it does not, troubleshoot the IDS to VCM connection.
d. Locate the original vehicle session when programming failed. This should be the last session used in most cases. If not, use the session created on the date that the programming failed.
NOTE: If the original session is not listed in the previous session list, click the Recycle Bin icon at the lower right of the previous session screen. This loads any deleted sessions and allows you to look through them. Double-click the session to restore it.
e. Once the session is loaded, the failed process should resume automatically.
f. If programming does not resume automatically, proceed to the Module Programming menu and select the previously attempted process, PMI or MR.
g. Follow all on-screen prompts/instructions.
h. The last screen on the IDS may list additional steps required to complete the programming process. Make sure all applicable steps listed on the screen are followed in order.
Customer Satisfaction Program 18N04 – Supplement #1
November 30, 2018
https://www.nhtsa.gov/recalls?nhtsaId=10152486
https://static.nhtsa.gov/odi/tsbs/2018/MC-10152486-9999.pdf
Customer Satisfaction Program 18N04
October 12, 2018
https://www.nhtsa.gov/recalls?nhtsaId=10148745
https://static.nhtsa.gov/odi/tsbs/2018/MC-10148745-9999.pdf
Reprogramming
Service Information & Reprogramming
Module Reprogramming
Diagnostic Software | Interface Device | Complete Vehicle Diagnostics | Module Programming | ||
1996-2017 Model Year |
2018-Present Model Year |
1996-2017 Model Year |
2018-Present Model Year |
||
IDS/FDRS | VCM, VCM II, VCMM | X | X | X | X |
FJDS/FDRS | Compatible J2534 Devices (Including VCM II and VCMM) |
X | X | X |
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
Integrated Diagnostic Software (IDS) / Ford Diagnosis & Repair System (FDRS)
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
Ford J2534 Diagnostic Software (FJDS) / Ford Diagnosis & Repair System (FDRS)
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool | |
CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool | |
CarDAQ-Plus | |
CarDAQ-M | |
VSI J2534 ECU Reprogrammer | |
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Application:Support most all of J2534 compatible software, most all of for software, ECU reprogramming in J2534 mode with programming voltage, supply software for diagnosing J1979 compatible vehicles.
- Material:VNCI (Vehicle network communication interface) is a device that works between diagnostic software and vehicle. It is compatible with J2534 Passthru and for .
- Advantage:Support J2534 and for mode in one device, and has automatic switch mode, more speedup, faster communication and reprogramming.VNCI J2534 for Nano protocol configuration include, for ISO15765, for ISO9141, for ISO14230, for J1850 PWM( supports IFR and 2X speed modes), for J1850 VPW (supports 4x speed mode).
- Easy to install:More stability, never let you down while reprogramming, portable and convenient, small package and easy to carry.
- Best Experience :We strive to provide you with the best quality products and the best customer experience.We try our best to meet your requirements.Please check the product information carefuly berore buying to aviod making mistakes.
- 🆚LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 PRO3/X-431 Throttle III/X431-TorqueIII/X431 V+, PROS V+, PAD3. ⓵ J2534 ECU Programming &Online functions directly connect to OEM server, 50+ reset same as X-431 Throttle;⓶Bi-directional control and All system diagnostics as Snap-on scanner; ⓷ Support 150+ brands Vehicles (include CAN/CAFD/DoIP/HD protocols and AutoAuth for FCA SGW) ⓸Powered by 8-core processor(1.8GHz), Android9.0 OS, 2.4 & 5GHz WiFi connection.
- 🚜[J2534 Reprogramming With FREE SMARTBOX 3.0】Save more than $2000, LAUNCH X431 PRO5 support J2534/DOIP/CANFD/HD protocols (Needn’t buy HDIII Module,Manufacture software and non-16pin adaptors need to be purchased separately.) Download OEM software from the manufacturer’s server to 1) program data to blank/used ECUs; 2) Reflash ECUs with data loss; 3)Upgrade ECU software version. As a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
- 👏[50+ Reset, Continuously Updated Reset Functions]: With the LAUNCH diagnostic tool, You will never be bothered by tricky vehicle issues and keep pace with newer technology. 50 commonly reset functions ( in the quick page ) reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to reset, regeneration, initiation, matching, etc. (Functions vary by models, configurations, and systems.)
- 🌐[One stop Intelligent Diagnostic Tool]: LAUNCH X431 PRO5 obd2 scanner Bluetooth provides Repair Tips, Repair Assist, Component Measurement, TSB, Relevant Cases DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair. 🤩[One Scanner For Multiple Uses]: LAUNCH diagnostic tool PRO5 collaborates with add-on modules (ADAS, Videoscope, TSGUN, X-ProG3, WiFi Pinter, Battery Tester) to expand business applications and improve diagnostic accuracy.
- 👍【2024 New OE Level Online Functions 】Bidirectional Scan Tool offers you various high-end online functions, which enable you to access the online data to do fast & complicated vehicle repairs, e.g. 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
- 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
- Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- 🚗[Technical assistance] If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online
- 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
- 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.
- 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
- 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 7 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.
Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
Mine did the same thing, and doesn’t tow as well as it did before the reprogram
After having the Powertrain Control Module reprogrammed (18-NO4B ) I noticed a drop in acceleration and it seems like the transmission shift points are different. Does this reprogramming change the power output? It seem to affect my truck. I had the reprogramming at El Cajon Ford in El Cajon California. I’m wondering if anyone has had the same experience?