Doors Will Not Lock Using The Keyless Entry Keypad – 2017 Ford Expedition

SSM 46464 – 2017 Expedition – Keyed Ignition – Doors Will Not Lock Using The Keyless Entry Keypad – Built On 14-OCT-2016 And Through 22-OCT-2016

Some 2017 Expedition vehicles built on 14-OCT-2016 and through 22-OCT-2016 with a keyed ignition (non-push button start) may have inoperative door locks when using the keyless entry keypad.

 

Reprogram the Body Control Module (BCM) to the latest calibration using IDS release 104.04 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

Use causal part 15604 and use applicable labor operations in section 10 of the SLTS manual.

---

APPLICABLE VEHICLES
2017 TRUCK: B7 EXPEDITION (U222)

---

https://static.nhtsa.gov/odi/tsbs/2017/SB-10100066-2532.pdf

 

---

 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

• Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
• Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com