| “This site contains affiliate links for which OEMDTC may be compensated” |
SSM 47306 – 2015-2017 Mustang – Inoperative Park Aid Camera, Luggage Compartment Lamp, DeckLid Release And/Or Poor Satellite Radio Reception
Some 2015-2017 Mustang vehicles may experience an inoperative Rear Parking Aid Camera, luggage compartment lamp, deck lid release and/or poor satellite radio reception.
Check the 14A005 wire harness at the right deck lid hinge for damage between the package tray harness retaining clip and the deck lid harness retainer clip.
Repair the harness following repair guidelines from section 5-1 of the wiring diagram.
If equipped with deck lid mounted satellite antenna, make sure the shielding is wrapped on the antenna wires securely after any repair.
Secure the harness ensuring it rolls downward into the trunk area when closing the deck lid and does not become trapped between the deck lid and the deck lid opening flange.
This concern may be accompanied by Diagnostic Trouble Codes (DTCs) B115E, C1001, and B1A89.
APPLICABLE VEHICLES
2015 – 2017 CAR: ZG S550N MUSTANG
Bestseller No. 1
Eventronic 400 Pcs Heat Shrink Tubing Kit-3:1 Ratio Adhesive Lined,Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black
- 【3:1 SHRINK RATIO & FAST CONTRACTION SPEED】Shrinks to 1/3 of its original diameter and seals extremely tightly, solving the problem of many 2:1 shrink tubes that don't shrink enough and therefore don't seal tightly enough. Shrink temperature: 80 to 125°C. Provides a professional connection within seconds.
- 【INCLUDES ADHESIVE COATING】When the heat shrink tubing is heated, it automatically releases adhesive and seals the connection extremely reliably. This creates a waterproof and durable insulation with a satisfaction guarantee.
- 【DUAL WALL TUBING】The outer wall of the shrink tube provides extremely high abrasion resistance. The inner wall creates a consistently waterproof seal and excellent strain relief. Our solder connectors will also impress you!
- 【7 SIZES】We offer 7 of the most commonly used shrink tube diameters in the world, ranging from 3/32" to 3/4". All of our shrink tubes are pre-cut to 1.75 inches.
- 【VERSATILE APPLICATIONS】The waterproof Eventronic shrink tubing can be used in marine and automotive wiring, model building, and DIY electrical wiring projects. The application areas are very diverse, such as electrical insulation/environmental sealing to protect against moisture, fuel and chemicals/protection of surfaces against abrasion, peeling and denting.
Bestseller No. 2
Wirefy Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black 180 PCS
- 3:1 SHRINK RATIO - Wirefy heat shrink tubing recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
- GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.
- VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32" to 3/4". Shrink tubing is precut to 3.5 inches.
- EASY TO USE - Simply slide the heat shrink tube over your connection point and apply heat. Professional connections made in seconds.
- DUAL WALL TUBING - Outer wall of the heat-shrink tubing provides abrasion resistance. Inner wall creates waterproof seal and strain relief.
SaleBestseller No. 3
900 Pcs Wire Heat Shrink Tubing Kit, Industrial Heat-Shrink Tubing for Wires, 2:1 Marine Grade Heat Shrink Wrap, Premium Large Electrical Waterproof Heat Shrink Tape,12 Sizes 6Colored Assorted, DHOOZ
- 900 PCS WIRE HEAT SHRINK TUBING KIT LINED: 2:1 Industrial heat-shrink tubing for wires include: 1/24 (1.0mm) 200 pcs, 1/16 (1.5mm) 200 pcs, 1/12 (2.0mm) 100 pcs, 1/10 (2.5mm) 80 pcs, 1/8 (3.0mm) 60 pcs, 1/7 (3.5mm) 50 pcs, 1/6 (4mm) 50 pcs, 1/5 (5mm) 40 pcs, 1/4 (6mm) 30 pcs, 2/7 (7mm) 30 pcs, 2/5 (10mm) 30 pcs, 1/2 (13mm) 30 pcs, length: 1.77 inch(45 mm), total 900 pcs, 12 Sizes, 6 Colors. Our colored marine heat shrink tubing satisfied for your different need.
- PREMIUM MATERIAL: Our color industrial heat-shrink tubing for wires made of polyolefin, shrinkage ratio: 2:1, and makes a tight seal. Our colored wire shrink wrap tubing has good electrical insulation, corrosion resistance and high temperature resistance.
- EASY TO USE AND STORE: 12 Sizes of premium marine grade heat shrink wrap for you to choose, all packed in a plastic box for easy store and carry. Simply slide heat shrink tubing be over your connection point and apply heat, professional connections made in seconds, waterproof and long-lasting insulation.
- WIDELY USED: Our color marine grade heat shrink wrap suitable for wire connection, rust prevention and corrosion protection of solder joints, cable joints, protection and insulation processing of wire end, wiring harness. Our large electrical waterproof heat shrink tape also works well for protecting headphones and phone cables.
- SATISFIED SERVICE: We are committed to providing every customer premium large electrical waterproof heat shrink tape and satisfied service. If there are any problems with our wire heat shrink tubing kit lined, contact us, we will give you a satisfactory answer.
SaleBestseller No. 4
Ginsco 580 pcs 2:1 Heat Shrink Tubing Kit 6 Colors 11 Sizes Assorted Sleeving Tube Wrap Cable Wire Kit for DIY
- BIG COLLECTION – Totally 580pcs,11 specifications: 1/24"(80pcs),1/16"(80pcs),1/12"(100pcs),3/64"(30pcs),1/8"(60pcs),9/64"(30pcs),5/32"(70pcs),1/5"(30pcs),15/64"(20pcs),5/16"(20pcs),25/64"(60pcs).
- 2:1 SHRINK RATIO – When heat, it will shrink up to 1/2 of original diameter，makes it possible to repair most damaged cable jackets without removing connectors. Ratio: 2:1 Operating Temperature: -55°C to + 125°C
- EASY TO USE – 1,Choose a right size of tubes, insert the wires into the tube, slip it into place after the connection is made. 2, Keep the nozzle about 2" distance from the tube, apply heat at a 45 degree angle until the tube tightly shrunk around the joint.
- WELL ORGANIZED – Comes with a plastic organizer, the tubes place in 16 separated compartments, providing an organized way to help you identify the right sizes quickly, classify easily.. 6 colors are for color coding to help identify cables such as red for power, black for ground.
- WIDELY APPLICATION - Repairing phone and headphone cables, electrical insulation, identifying wires (by the colors), organizing the messy cables/wires, lights wiring, home repair projects.
SaleBestseller No. 5
650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material
- Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap.
- Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun.
- Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: >20kV/mm. Elongation at break: >400%. Volume resistivity: >1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape.
- Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components. Also works well for protecting headphones and phone cables.
- What You Get: Total 650pcs ratio 2:1 Black heat shrink tubes, 8 sizes. Supplied internal diameter, 150-1/24", 120-1/12", 100-1/8", 90-1/6", 80-1/5", 50-1/4", 30-5/16", 30-2/5". Single length 1 4/7". All packed in a plastic case for easy storage. innhom wire shrink tubing can ensure your pleasant shopping experience.
Bestseller No. 6
Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black, Red - 400 PCS
- 【INCLUDES ADHESIVE COATING】: When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation. This creates a waterproof and durable insulation with a satisfaction guarantee.
- 【DUAL WALL TUBING】: Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief. Our solder connectors will also impress you!
- 【3:1 SHRINK RATIO & FAST CONTRACTION SPEED】: Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough. Shrink temperature: 80 to 125°C. Provides a professional connection within seconds.
- 【VARIETY OF SIZES】: We offer larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches.
- 【FUNCTIONAL WIRE SHRINK WRAP TUBING】: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. Heat shrink tubing assortment is mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components. Also works well for protecting headphones and phone cables.
SaleBestseller No. 7
400 Pcs Wire Heat Shrink Tubing Kit With Adhesive lined, Industrial Heat-Shrink Tubing for Wires, 3:1 Marine Grade Heat Shrink Wrap, Premium Large Electrical Waterproof Heat Shrink Tape-Black by DHOOZ
- 400 PCS WIRE HEAT SHRINK TUBING KIT WITH ADHESIVE LINED: 3:1 Industrial heat-shrink tubing for wires include: 3/32 (4.5 mm) 150 pcs, 1/8 (6 mm) 110 pcs, 3/16 (8.5 mm) 60 pcs, 1/4 (10 mm) 32 pcs, 3/8 (15 mm) 24 pcs, 1/2 (22 mm) 12 pcs, 3/4 (33 mm) 12 pcs, length: 1.77 inch(45 mm), total 400 pcs. Our marine heat shrink tubing satisfied for your different need.
- PREMIUM MATERIAL: Our black industrial heat-shrink tubing for wires made of polyolefin, shrinkage ratio: 3:1, and makes a tight seal. Our wire shrink wrap tubing has good electrical insulation, corrosion resistance and high temperature resistance.
- EASY TO USE AND STORE: 7 Sizes of premium marine grade heat shrink wrap for you to choose, all packed in a plastic box for easy store and carry. Simply slide heat shrink tubing be over your connection point and apply heat, professional connections made in seconds, waterproof and long-lasting insulation.
- WIDELY USED: Our marine grade heat shrink wrap suitable for wire connection, rust prevention and corrosion protection of solder joints, cable joints, protection and insulation processing of wire end, wiring harness. Our large electrical waterproof heat shrink tape also works well for protecting headphones and phone cables.
- SATISFIED SERVICE: We are committed to providing every customer premium large electrical waterproof heat shrink tape and satisfied service. If there are any problems with our wire heat shrink tubing kit with adhesive lined, contact us, we will give you a satisfactory answer.
Bestseller No. 8
Wirefy 3/8" Heat Shrink Tubing - 3:1 Ratio - Adhesive Lined - Marine Grade Heat Shrink - Black - 50 Feet Roll
- 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
- GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation.
- EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds.
- DUAL WALL TUBING - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch.
- 3/8 INCH (9.5mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects.
Bestseller No. 9
Crossarctic 300PCS 3:1 Ratio Heat Shrink Tubing, Adhesive Lined Marine Grade Heat Shrink Tube - 45/90MM Length 5 Size Perfect for Home, Automotive, Industrial, Dia. 2.4MM - 9.5MM (Black/Red)
- ✅Universal Fit: 3:1 Ratio heat shrink tube offers an ideal shrink ratio, ensuring a secure and snug wrap for a wide range of cable sizes.No matter the application, our heat shrink tube effortlessly accommodates various diameters and shapes, providing a consistent and reliable solution.
- ✅Versatility at its Finest: Range of 3:1 heat shrink tube covers the most commonly used specifications (Dia.2.4MM - 9.5MM). Making it suitable for a wide array of applications.Whether you're working on electrical systems,automotive repairs,or industrial projects, our tubing provides insulation, strain relief, and mechanical protection you can rely on.
- ✅Enhanced Protection: The adhesive forms a robust, moisture-resistant marine grade waterproof seal that shields your connections from external factors like water, dust, and contaminants. Experience the peace of mind that comes with enhanced insulation and reliability.
- ✅Don't Compromise On Quality: We prioritize durability in our heat shrink tube. Constructed with top-quality heat shrink materials, it exhibits exceptional resistance against chemicals, abrasion, and UV rays.Rest assured,our tubing is built to withstand the most demanding conditions, ensuring longevity and maintaining optimal performance over time.
- ✅Simplified Installation: We understand the value of your time, which is why our heat shrink wrap is designed for easy and efficient forming.Just slide the tubing over your cables,apply heat evenly, and watch it shrink into a tight fit.Our user-friendly process saves you time, effort, and guarantees professional-grade results.
Bestseller No. 10
XHF 3/16 Inch 20Ft 3:1 Waterproof Heat Shrink Tubing Roll Marine Grade Adhesive Lined Heat Shrink Tube, Insulation Sealing Oil-Proof Wear-Resistant Black
- [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects.
- [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.
- [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
- [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3.
- [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from.
Last update on 2024-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.